53" Federal Signal Legend LED Lightbar - LED Take-Down & Alley Lights - LGD53Y

This Federal Signal Legend LED Lightbar is available for purchase, from us, on several State and Cooperative purchasing contracts. Please call for agency or department pricing.

Federal Signal's Legend LED Lightbar has been utilized by agencies and departments of all sizes. It is among the brightest and most effective lightbars available.

Federal Signal recently added LED Take-Down and LED Alley lights to the Legend Lightbar platform. The new model designation is LGD53Y. The Legend lightbar is completely customizable and can be ordered in almost any color or lighting configuration.

Features and benifits include -

SMARTER:

ROC SOLID CONSTRUCTION Patent-pending ROC (Reliable Onboard Circuitry™) technology eliminates 85% of potential failure points in the lightbar — reducing repair costs and increasing the hours your emergency vehicles stay on the road.

Yesterday ’s technology. The most common failure points found in a typical lightbar, as shown below, occur between the connector to its light source and the lightbar’s power source. With older technology, each light head usually has at least two, sometimes four, connections per light head. ROC technology reduces the number of parts found in a typical lightbar by approximately 65%.

SIMPLER:

SIMPLE TO CUSTOMIZE AND CONFIGURE Legend can be easily reconfigured in minutes, right on the vehicle, without removing and rewiring individual modules. ROC boards are also individually labeled to make reconfiguration easy.

Internal SignalMaster™ Directional Warning Legend can be configured for internal Federal Signal SignalMaster control operation. In this mode, an external SignalMaster controller is not required. A simple slide switch activates the lightbar’s internal SignalMaster.

While operating in three priority modes, all modules keep sequence with the flash pattern. Once directional warning is selected, the SignalMaster modules override the current flash pattern.

LEGEND AND RS485 SYSTEM:

With the RS485 System, it is fast and easy to clone and duplicate patterns from vehicle to vehicle. The function of each individual light head can be controlled with the RS485 system.

• Four default patterns are included for positions 1, 2, 3 and the intersection clearing mode.
• Lightbars are controlled through a standard RS485 bus connection. Protocol is based on SAE J1708 and J1587 standards.
• Compact serial interface module is included with every lightbar for those vehicles not equipped to accept RS485 bus connections.
• Built-in SignalMaster directional warning capability is standard with the Legend. SignalMaster patterns can be activated via a standard switch and do not need a separate directional warning controller.
• Additional pre-programmed options such as front/rear cut-off, intersection warning, and dimming can easily be programmed into the lightbar operation and cloned from vehicle to vehicle.

Specifications:

LGD45Y

• 52.7 in (113.0 cm) wide
• 2.5 in (6.4 cm)
• 11.2 in (28.4 cm)
• 24.2 lbs
• 12.8 VDC
• -30oC to +65oC